Epson AcuLaser CX16 - Page 85

Item Description
Transmission
Operation
Density Level Specify the density level for fax scanning.
Choices -1, 0, +1
Default 0
Configuration Menu Equivalent:
UTILITY - FAX TX OPERATION - DENSITY LEVEL
Quality Priority Select the quality setting given priority with fax scanning.
Choices Standard/Text, Fine/Text, Super Fine/Text,
Standard/Photo, Fine/Photo, Super Fine/Photo
Default Standard/Text
Configuration Menu Equivalent:
UTILITY - FAX TX OPERATION - QUALITY PRIORITY
Default TX Select the default transmission mode.
Choices Memory TX, Direct TX
Default Memory TX
Configuration Menu Equivalent:
UTILITY - FAX TX OPERATION - DEFAULT TX
Header Select whether or not the transmission information (date sent, send-
er’s name, fax number, etc.) is printed on sent faxes.
Choices On, Off
Default On
Configuration Menu Equivalent:
UTILITY - FAX TX OPERATION - HEADER
Note:
If “Fax PTT Setting” is set to “Korea”, no setting other than “On” can be
selected; therefore, this parameter does not appear.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 85