Item Description
Reception Operation Memory RX Mode Select whether to allow (“On”) memory reception or not (“Off”). Select
On not to print when receiving confidential faxes or when no one is
around, for example, at night. The received document can be stored
in the memory and printed at a specified time or when memory
reception is set to “Off”. A password can be set to specify the starting
time or ending time of memory reception, or to cancel the function.
The set of starting time and ending time are valid every day until
memory reception is turned off.
Choices Off, On
Default Off
❏ On Time
Range: 00:00 to 23:59
❏ Off Time
Range: 00:00 to 23:59
❏ Password
Range: 0000 to 9999
Configuration Menu Equivalent:
UTILITY - FAX RX OPERATION - MEMORY RX MODE
Number of Rings Specify the number of rings that are sounded.
Range 1 to 16
Configuration Menu Equivalent:
UTILITY - FAX RX OPERATION - NO. of RINGS
Reduction RX Select whether documents longer than the paper are printed re-
duced, split, or discarded.
If “On” is selected, received faxes are printed reduced.
If “Off” is selected, received faxes are printed at full size and split onto
multiple pages.
If “Cut” is selected, received faxes are printed while erasing any part
that does not fit within the page. However, when sending a docu-
ment more than 24 mm (1 inch) longer than the paper, “Cut” is not
available. (In this case, the document is split.)
Choices On, Off, Cut
Default On
Configuration Menu Equivalent:
UTILITY - FAX RX OPERATION - REDUCTION RX
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 86
To Next Page
Loading...
Need help?
General
