Epson AcuLaser CX16 - Page 90

Item Description
Reporting Activity Report A report can be printed to show the results of transmissions/recep-
tions.
Choices On, Off
Default On
Configuration Menu Equivalent:
UTILITY - REPORTING - ACTIVITY REPORT
TX Result Report Select whether or not a report showing the results of a transmission is
printed automatically after the transmission is finished.
If “ON” is selected, a report is printed after each transmission is fin-
ished.
If “ON(ERROR)” is selected, a report is printed after the transmission
only if an error occurred.
If “OFF” is selected, a report is not printed after each transmission is
finished. The report is not printed even if an error occurred.
Choices On, On(Error), Off
Default On(Error)
Configuration Menu Equivalent:
UTILITY - REPORTING - TX RESULT REPORT
RX Result Report Select whether or not a report showing the results of a reception is
printed automatically after the reception is finished.
If “ON” is selected, a report is printed after each reception is finished.
If “ON(ERROR)” is selected, a report is printed after the reception only
if an error occurred.
If “OFF” is selected, a report is not printed after each reception is
finished. The report is not printed even if an error occurred.
Choices On, On(Error), Off
Default On (Error)
Configuration Menu Equivalent:
UTILITY - REPORTING - RX RESULT REPORT
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 90