Epson AcuLaser CX16 - Page 93

Item Description
TCP/IP Select whether or not to make a connection via TCP/IP.
Choices Enable, Disable
Default Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - TCP/IP
Speed Select the transmission speed of the network.
Choices Auto, 10Base-T(Full), 10Base-T(Half), 100Base-TX(Half),
100Base-TX(Full)
Default Auto
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SPEED/DUPLEX
LPD Select whether LPD is enabled or disabled.
Choices Enable, Disable
Default Enable
SLP Select whether SLP is enabled or disabled.
Choices Enable, Disable
Default Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SLP
HTTP Select whether HTTP is enabled or disabled.
Choices Enable, Disable
Default Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - HTTP
Apply button Applies the configuration settings in this window.
Clear button Resets all configuration settings to previous values.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 93