Item Explanation
Copies Designates the number of copies to be printed, from 1 through 999.
Duplex (AL-C300DN only) Turns duplex printing on or off. This allows you to print on both sides of a page.
This function is available only when you use A4, B5, LT, LGL, GLT, GLG, EXE, or F4 size
paper.
Settings (default in bold):
Off, On
Binding Specifies the binding direction of the printout.
This function is available only when you use A4, B5, LT, LGL, GLT, GLG, EXE, or F4 size
paper.
Settings (default in bold):
Long Edge, Short Edge
Start Page (AL-C300DN only) Specifies whether duplex printing starts from the front or back of the page.
This function is available only when you use A4, B5, LT, LGL, GLT, GLG, EXE, or F4 size
paper.
Settings (default in bold):
Front, Back
Skip Blank Page Enables you to skip blank pages when printing.
This function is available only for ESCP2, FX, or I239X mode.
Settings (default in bold):
Off, On
Auto Eject Page Specifies whether or not to eject paper when the limit specified in the I/F Time Out
setting is reached. The default is Off, which means paper is not ejected when the time-out
limit is reached.
This function is not available in PS3 and PCL.
Settings (default in bold):
Off, On
Size Ignore If you want to ignore a paper size error, select On. When you turn this item on, the printer
keeps printing even if the image size exceeds the printable area for the specified paper
size. This may cause smudges because of the toner that is not transferred onto the paper
properly. When this item is turned off, the printer stops printing if a paper size error occurs.
Settings (default in bold):
Off, On
Auto Cont When you turn this setting on, the printer automatically continues printing after a certain
period of time when one of the following errors occurs: Set Paper, Print Overrun, or
Memory Overflow. When this option is off, you must press the OK button to resume
printing.
Settings (default in bold):
Off, On
AL-C300 Series User's Guide
Getting to Know Your Printer
20
To Next Page
Loading...
