To Next Page

To Previous Page

Item Explanation

Paper Size Specifies the paper size for the document printing.

If Auto is selected, the paper size is determined based on the size of the first page that is

printed.

Settings (default in bold):

Auto, A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10, DL, C6, IB5

Duplex (AL-C300DN only) Specifies the duplex setting for the document printing. When Duplex Long is selected,

duplex printing is done with long edge binding. When Duplex Short is selected, duplex

printing is done with short edge binding.

Settings (default in bold):

Off (Simplex), Duplex Long, Duplex Short

Quick Print JobMenu

This menu allows you to print or delete print jobs that were stored in the printer’s memory using the Quick Print Job

feature (Re-Print Job, Verify Job , Stored Job) of the printer driver’s Reserve Job function. For instructions on using

this menu, see“Using the Reserve Job function” on page 50.

ConfidentialJobMenu

This menu allows you to print or delete print jobs stored in the printer’s memory using the Confidential Job feature of

the printer driver’s Reserve Job function. You need to enter the correct password to access this data. For instructions

on using this menu, see “Using the Reserve Job function” on page 50.

Common Settings

Setup Menu

Item Explanation

I/F Time Out Specifies the length of the time, in seconds, before a time out when interfaces are being

switched automatically. The time before a time out occurs is the length of time from the

point when no data is being received from an interface until the point of switching the

interface. If the printer has a print job when switching the interface, the printer prints the

print job.

Settings (default in bold):

0, 5 ... 60 ... 300 in increments of 1

MP Tray Priority This setting determines whether the MP tray has the highest or lowest priority when Auto

is selected as the Paper Source setting in the printer driver. When Normal i s s elec ted a s the

MP Tray Priority, the MP tray has the highest priority as the paper source. If you select

Last, the MP tray has the lowest priority.

Manual Feed Allows you to select the manual feed mode for the MP tray.

Settings (default in bold):

Off, 1st Page, EachPage

AL-C300 Series User's Guide

Getting to Know Your Printer

Epson AL-C300 Series User Manual

Questions and Answers: