Item Explanation
301 Noise Level Adjusts the image gradation. As the value increases, the image gradation gets better, but
the image granularity gets worse.
Settings (default in bold):
0 ... 3 ... 7 (step 1)
302 Color DiagnosisSht Prints a color diagnosis sheet that allows you to check for inaccurate colors, blurring or dirt
on the printout.
303 Screen 25
304 Screen 50
305 Screen 100
Prints halftone or full pattern for each color; Y, M, C, and K, which allows you to check the
unevenness of the density or pitch of the printout.
303 Screen 25 prints the pattern in a 25% density halftone.
304 Screen 50 prints the pattern in a 50 % density halftone.
305 Screen 100 prints the pattern at 100% density.
306 AdjustFineLine Adjusts thin lines to be printed thicker, if visible. As the value increases, the line is printed
thicker.
Settings (default in bold):
-3 ... 0 ... 2 (step 1)
307 Calibration 600
308 Calibration 1200
Calibrates the printer so colors are adjusted to print at 600 dpi or 1200 dpi.
Consumable Products, Maintenance Parts, and Options
Consumable products
Product name Part number Remark
Toner Cartridge (Black) 0750/0751 ❏ Storage temperature:
0 to 35˚C (32 to 95˚F)
❏ Storage humidity:
30 to 85% RH
❏ These products comply with CE marking requirements
in accordance with EMC Directive 2004/108/EC.
Toner Cartridge (Yellow) 0747
Toner Cartridge (Magenta) 0748
Toner Cartridge (Cyan) 0749
Photoconductor Unit (Black) 1204
Photoconductor Unit (Yellow) 1201
Photoconductor Unit (Magenta) 1202
Photoconductor Unit (Cyan) 1203
Waste Toner Bottle 0595
AL-C300 Series User's Guide
Appendix
93
To Next Page
Loading...
Need help?
General