Epson AL-C300 Series User Manual

Item Explanation
ZeroChar Specifies whether the printer prints a slashed or unslashed zero.
Settings (default in bold):
0, (or the zero character with a slash)
CharacterSet Selects character table 1 or 2.
Settings (default in bold):
1, 2
Admin Settings
Note:
❏ To access the Admin Settings menu, enter the administrator password.
❏ The password is not set in default. Press the OK button when Admin Password is required.
❏ If you forget your password, contact your dealer. Note that when the password is initialized, the settings and data stored on
the printer are deleted. Depending on your environment, settings, such as network connection settings, may need to be
done again. We recommend making a note or backup of the necessary data and setting information.
Password Config Menu
Item Explanation
Change Password Specifies an administrator password. Enter the old password first and then enter the new
password twice.
To enter the password, press the d Down or u Up button to select the character and press
the r Right button to determine the character. After all characters are determined, press
the OK button.
Settings : (up to 20 characters)
Note:
The following characters and blank spaces can be used.
0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
!"#$%&'()*+,-./:;<=>?@^_`{|}~
Limitation When Interface is selected, you need to enter the password to change interface
settings. When Config is selected, you need to enter the password to change the items
you configured.
Settings (default in bold):
Disable, Interface, Config, All
Init SelecType
Item Explanation
Init All SelecType If Yes (Unprinted data is deleted) is selected, the administrator settings are
changed to their factory settings.
AL-C300 Series User's Guide
Getting to Know Your Printer
35

Epson AL-C300 Series Specifications

General

Brand	Epson
Model	AL-C300 Series
Category	Printer
Language	English