Epson Artison 800 - Main Frame

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Disassembly Procedures 144
Confidential
2. Slide the Pick-up Roller in the direction of the arrow, and remove it.
Figure 4-103. Removing the Pick-up Roller (2)
4.2.4.11 Main Frame
 Parts/Components need to be removed in advance:
ADF Unit (Artisan 800/PX800FW/TX800FW only)/Scanner Unit/Upper Left
Housing/Paper Guide Top Assy/Upper Housing/Rear Left Housing/Left Housing/
Decoration Belt/Hinge/Rear Right Housing /Right Housing/Power Supply Unit/
Rear ASF Paper Guide Cover/Lower ASF Paper Guide Assy/CDR Tray Assy/
Main Board/CSIC Assy/Wireless LAN Board /Cartridge Box Unit/Ink Supply
Tube Assy/Card Slot Assy/Decompression Pump Unit/Waste Ink Tray Assy
 Removal procedure
C A U T I O N
Be careful not to touch or damage the Pick-up Roller so can
adversely affect print quality.
A D J U S T M E N T
R E Q U I R E D
When replacing the Pick-up Roller, make sure to carry out the
specified lubrication. (See
Chapter 6 "MAINTENANCE" .)
Pick-up Roller
C A U T I O N
Since the Main Frame consists of several frames, it may deform
when lifting it. When lifting the Main Frame, it is recommended to
hold the positions shown in
Fig. 4-104.
Figure 4-104. Holding positions of Main Frame
Holding positions
http://www.manuals4you.com