Epson Artison 800 - Left Housing;Decoration Belt L (Artisan 700;PX700 W;TX700 W)

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W 191
Confidential
4.3.1.5 Left Housing/Decoration Belt L (Artisan 700/PX700W/
TX700W)
 Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing/Rear
Left Housing
 Removal procedure
1. Remove the Decoration Belt.
2. Remove the screws (x2) that secure the Left Housing.
Figure 4-217. Removing the Left Housing/Decoration Belt L (1)
3. Release the hooks (x3) on the bottom and dowel (x1) on the front side of the
Left Housing, and remove the Left Housing in the direction of the arrow.
Figure 4-218. Removing the Left Housing/Decoration Belt L (2)
C H E C K
P O I N T
The disassembly/reassembly procedures for Artisan 800/PX800FW/
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
4.2.2.7 "Left Housing / Decoration Belt L" (p109) for the
procedures.
C.B.A. 3x6 (black)(6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Decoration Belt
Left Housing
C A U T I O N
So as to make description easier, the printer in the photographs is
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
 Align and insert the rib in the front inside of the Left Housing to
the inside of the rib of the Base Frame.
Figure 4-219. Installing the Left Housing
 Align the positioning hole of the Left Housing with the dowel of
the Base Frame. (See
Fig. 4-218.)
Left Housing
Hook
Positioning hole
& dowel
The ribs of Left
Housing and the Base
Frame are inside.
Rib of the Base Frame
Rib of the Left Housing
http://www.manuals4you.com