Epson Artison 800 - Makes Prints from Index Sheet Function

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
PRODUCT DESCRIPTION Specification for Each Function 35
Confidential
1.7.2.6 Makes Prints from Index Sheet Function
 Print settings
Note *1: EAI model: MMM.DD.YYYY (Sep. 21.2007)
 Rules on reading Index Sheet markings
The user can specify images to be printed and their print settings shown in Table
1-35 by putting marking on the Index Sheet. The printer reads the markings
according to the following rules.
Note: • About 50% or more range of the mark area must be marked out to be read by the
printer.
• For running out and excessive marking out, the two white/black search patterns shown
above are superimposed on the mark, and judgement is made according to this
matching ratio.
• The judgement criteria is as follows;
black matching: 80% or more, white matching: 50% or more.
• The figure below shows the judgement example according to the rules described
above.
 Index Sheet errors
Table 1-35. Print Settings
Item Print Index Sheet Makes Prints from Index Sheet
Number of copies ---
According to the marking on the index
sheet.
Paper Type Plain paper
Paper Size A4
Layout ---
Quality Standard Standard
Expansion ---
According to the setting made by the control
panel.
Date
YYYY.MM.DD
(2007.09.21)*
1
According to the setting made by the control
panel. YYYY.MM.DD (2007.09.21)*
1
Bi-directional On On
Print Index Sheet
Setting-Select
According to the setting
made by the control panel.
---
Table 1-36. Rules on Reading Markings
Item Mark Description Remarks
Left edge
(one each)
Reference position for
reading markings.
An error occurs if these markings cannot be
read due to ink stain or any other cause.
Right edge
(one each)
Reference position for
reading markings.
Block code
(36 pcs.)
Sheet information
(memory card, page)
Image selection
(30 pcs. x 3)
Selects the image to be
printed.
An error occurs if no image selection
marking is read.
Paper type/size
(4 pcs.)
Selects the paper type/size. An error occurs if two or more markings are
read for one image.
Layout (2 pcs.) Selects the layout. An error occurs if two or more markings are
read for one image. If no marking is read,
borderless layout is applied.
Date Prints the date information. When this marking is read, the date is
printed on the image.
Table 1-37. Index Sheet Error List
Error Name Description
Index sheet scan error
(incorrect sheet setting)
The Index Sheet is not properly placed on the document glass.
Index sheet scan error
(incorrect image selection
marking)*
Image selection markings are not correct.
Index sheet scan error
(incorrect paper selection
marking)
Paper selection markings are not correct.
Index sheet scan error
(unmatch between memory
card and sheet)
The memory card may have been changed or some images
may have been added or deleted after the Index Sheet is
printed.
Table 1-36. Rules on Reading Markings
Item Mark Description Remarks
<OK example> <NG example>
(not enough)
(too much)
http://www.manuals4you.com