Epson Artison 800 - Rear Left Housing (Artisan 700;PX700 W;TX700 W)

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W 190
Confidential
4.3.1.4 Rear Left Housing (Artisan 700/PX700W/TX700W)
 Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing
 Removal procedure
1. Remove the screws (x2) that secure the Rear Left Housing, and remove the
Rear Left Housing.
Figure 4-216. Removing the Rear Left Housing
A D J U S T M E N T
R E Q U I R E D
After removing/replacing the Upper Housing, make the specified
adjustments. (See
Chapter 5 "ADJUSTMENT".)
C H E C K
P O I N T
The disassembly/reassembly procedures for Artisan 800/PX800FW/
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
4.2.2.6 "Rear Left Housing" (p109) for the procedures.
When installing the Rear Left Housing, insert the ribs (x2) of the
Rear Left Housing to the inside of the Left Housing. (See
Fig.
4-216.)
C.B.A. 3x6 (black) (6±1Kgfcm)
Rib
Left Housing
Rear Left Housing
http://www.manuals4you.com