Epson Artison 800 - PW Adjustment;First Dot Position Adjustment

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
ADJUSTMENT Adjustment Using Adjustment Program 220
Confidential
5.2.3 PW Adjustment/First Dot Position Adjustment
Patterns are printed as shown below.
Figure 5-3. PW Adjustment Pattern/First Dot Position Adjustment Pattern
 PW Adjustment
How to Judge
Enter the value of the line located 5mm away from each edge.
Example: In the left figure, enter “0” (top), “5” (bottom), “-3” (left) and “0” (right).
 First Dot Position Adjustment
How to Judge
Enter the value of the point of intersection of the PW Adjustment pattern line and First
Dot Position Adjustment pattern line on the left.
Measure the distance from the left edge of the paper to the printed line. Enter the value
for the line that is exactly 5 mm away from the edge.
Example: In the left figure, enter “2” since the lines intersect at 2.
-8
-7
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
-5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-5-4-3-2-10123456789101112131415
-8
-7
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
5mm
A: PW Adjustment pattern line
B: First Dot Position Adjustment pattern line
Intersection point of A and B
http://www.manuals4you.com