Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Disassembly Procedures 148
Confidential
3. While holding the right side of the EJ Frame Assy, turn the Spur Gear on the
left side in the direction of the arrow, and move the EJ Frame Assy to the front
side.
Figure 4-111. Removing the EJ Frame Assy (1)
4. Pull out and remove the EJ Frame Assy from the EJ Frame Shaft.
Figure 4-112. Removing the EJ Frame Assy (2)
5. Remove the screw (x1) that secures the EJ Release Frame Assy L and remove
the EJ Release Frame Assy L with the EJ Frame Shaft.
Figure 4-113. Removing the EJ Release Frame Assy L
EJ Frame Shaft
EJ Frame Assy
EJ Release Frame Assy L
EJ Frame Shaft
C.B.S. 3x6 (8±1Kgfcm)
Positioning hole & dowel
Attach the springs’ ends on to the EJ Frame Shaft
Attach the spring’s end on to the EJ Frame Assy
http://www.manuals4you.com
To Next Page
Loading...
