Flowchart 4-2. Disassembling Flowchart (2)
The colored blocks indicate the following.
• Blue: Artisan 800/PX800FW/TX800FW only.
• Yellow: Artisan 700/PX700W/TX700W only.
The parts surrounded with dotted line are not the shortest ways of
removing them, but you need to remove the parts/units if they exist on
the way to the target part/unit.
“ 4.2.4.11 Main Frame ”
(p144)
Flowchart 4-1 Disassembling Flowchart (1) (p99)
“ 4.2.4.16 Carriage Unit ”
(p154)
“ 4.2.4.2 CR Scale ” (p129)
“ 4.2.4.6 Ink System ”
(p135)
“ 4.2.4.17 Transmission
Holder Assy ” (p158)
“ 4.2.4.12 Front Frame ”
(p147)
“ 4.2.4.18 Rear Frame ”
(p159)
“ 4.2.4.21 Lower Paper
Guide Waste Ink Pad
Assy ” (p165)
“ 4.2.4.19 Upper Paper
Guide L/R / PE Sensor ”
(p161)
“ 4.2.4.12 Front Frame ”
(p147)
“ 4.2.4.14 PF Motor ”
(p150)
“ 4.2.4.15 CR Motor ”
(p152)
“ 4.2.4.13 EJ Frame Assy /
EJ Release Frame Assy R/
EJ Release Frame Assy L ”
(p147)
Disassembling the Scanner Unit
START
(Artisan 700/PX700W/TX700W)
“ 4.2.5.1 Scanner Upper Housing
(Artisan 800/PX800FW/
TX800FW) ” (p167)
“ 4.2.5.2 Scanner Motor
Unit ” (p168)
“ 4.2.5.3 Scanner Carriage Unit ”
(p169)
“ 4.3.3.1 Document Cover ” (p200)
“ 4.3.3.2 Scanner Upper Housing
(Artisan 700/PX700W/TX700W) ”
(p201)
“ 4.2.5.5 Cover Open Sensor ”
(p173)
“ 4.2.6.2 ADF Cover Assy/ADF
Cover L ” (p175)
Disassembling the ADF Unit (Artisan 800/PX800FW/TX800FW only)
“ 4.2.6.9 ADF Motor Unit ” (p181)
“ 4.2.6.10 ADF PF Roller ”
(p183)
“ 4.2.6.8 ADF Frame Unit ” (p180)
“ 4.2.6.7 ADF Document
Support Assy ” (p179)
“ 4.2.6.6 ADF Front Cover ”
(p179)
“ 4.2.6.5 ADF Cover Stacker/
ADF Document Support Cover ”
(p178)
“ 4.2.6.4 ADF Right Cover/ADF
Rear Cover ” (p176)
“ 4.2.5.4 Scanner CR Encoder
Board ” (p172)
“ 4.2.6.1 ADF Hinge ” (p174)
“ 4.2.6.3 ADF LD Frame Assy ”
(p176)
START
START
(Artisan 800/PX800FW/TX800FW)
To Next Page
Loading...
