101
You see a screen like this:
5. Select the Date & Time setting and press Enter.
6. Select your date and time settings. Then select Set and press Enter to confirm your changes.
7. When you are finished, press the Menu button to exit.
Parent topic: Using Basic Projector Features
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
Note: For interactive use, the image must be evenly rectangular, without distortion. Refer to the
Installation Guide for instructions on positioning the projector to achieve an evenly rectangular image.
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Correcting Image Shape with Arc Correction
Parent topic: Using Basic Projector Features
Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
To Next Page
Loading...
