Epson BrightLink 710Ui - Temporarily Using Interactive Features on One Projector

212
See the installation guide that came with your projector mount for instructions on installing multiple
projectors and selecting settings for interactive features. See the online DuoLink Setup Guide for
additional information.
Note: You may not be able to write and draw across the border of the images.
Temporarily Using Interactive Features on One Projector
Parent topic: Using the Interactive Features
Temporarily Using Interactive Features on One Projector
When you use the interactive features on an image projected by two side-by-side projectors, you can
temporarily limit the interactive features to one of the projectors.
1. Press the Home button on the remote control or projector or the icon on the projector control
toolbar.
You see a screen like this:
2. Press the icon.