176
• Using the Image Shift feature
• Moving the projector
Note: When using multiple projectors with DuoLink, draw a line across the two screens after pen
calibration and make sure the screens are aligned correctly. If the line position does not match, realign
the screens and perform calibration again. See the online DuoLink Setup Guide for additional
information.
Note: Move any pen you are not using away from the projection screen while calibrating.
Calibrating Automatically
Calibrating Manually
Parent topic: Using the Interactive Pens
Calibrating Automatically
You do not need the pens or a computer for Auto Calibration.
Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing
the Menu button on the remote control as described here.
1. Press the Menu button, select the Extended menu, and press Enter.
To Next Page
Loading...
