53
2. Connect the USB cable (or USB flash drive) to the projector's USB-A port.
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slide Show
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to one of the USB-A ports. To display
the connected USB device, select the USB1 source.
Note: If you have connected a document camera, select the USB2 source.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the Source Search button on the remote control and select the USB1 or USB2 source.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slide Show
To Next Page
Loading...
