295
Laser Safety Information
This projector is a Class 1 laser product that complies with the IEC/EN60825-1:2014 international
standard for lasers. Follow these safety instructions when using the projector.
• If an error occurs in the projector or Touch Unit, turn off the power and unplug the projector and Touch
Unit immediately. Continuing to use the projector or Touch Unit could result in an electric shock, fire,
or visual impairment. Contact Epson support.
• Do not attempt to disassemble or modify the projector or Touch Unit. The projector contains a high-
power laser component. Serious injury could result.
• Do not look into the lens during projection. Also, do not look into the lens using optical devices, such
as a magnifying glass or telescope. This could cause visual impairment.
• When turning on the projector at a distance using the remote control, make sure no one is looking into
the lens.
• Do not allow small children to operate the projector. Children must be accompanied by an adult.
• Do not apply optical devices, such as a magnifying glass or reflector, to the projected image. Using the
projector may result in physical harm, fire, or an accident.
• Before using the projector, make sure there is nothing in the area that could reflect the projected
image.
• When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with
your local or national laws and regulations.
Laser warning labels are attached to the projector in the following locations:
• Inside
To Next Page
Loading...
Need help?
General
Weight and Dimensions
