Epson Disc Producer PP-100 User Manual

112
Disc transfer error
Resolve the problem as follows.
1. Turn the product off.
2. Remove the disc.
3. Turn the product on and retry to publish a
disc.
Arm failed to release a disc
Resolve the problem as follows.
1. Turn the product off.
2. Remove the disc.
If the arm has picked up a disc, do not remove
the disc by hand, as the arm may be damaged.
To remove the disc, turn on the power again,
and let the initialization process remove the disc.
3. Turn the product on and retry to publish a
disc.
If the disc is left in the drive tray or printer tray,
remove it from the tray. (See “Disc Does not
Come Out” on page 123.)
Internal error
Resolve the problem as follows.
1. Turn the product off.
2. Open the disc cover and check that there are
no foreign objects inside; then close the disc
cover.
If the arm has picked up a disc, do not remove
the disc by hand, as the arm may be damaged.
To remove the disc, turn on the power again,
and let the initialization process remove the disc.
3. Turn the product on and retry to publish a
disc.
Lights
Conditions/Remedies
Power BUSY ERROR INK
STACKER
1 2 3 4

Epson Disc Producer PP-100 Specifications

General

Printing Technology	Inkjet
Disc Capacity	100 discs
Print Resolution	1440 x 1440 dpi
Interface	USB 2.0
Dimensions	377 x 493 x 348 mm
Number of Drives	1
Supported Disc Formats	CD, DVD
Operating System Compatibility	Windows XP, Windows Vista, Windows 7
Print Speed	Approximately 60 discs/hour