Epson Disc Producer PP-100 User Manual

114
Error Associated with Ink
Stacker 2 (set as the output stacker) is full.
Remove published discs from Stacker 2.
Stacker 3 is full.
Remove published discs from Stacker 3.
Only for PP-100/PP-100AP
Stacker 4 is full.
Remove published discs from Stacker 4.
Only for PP-100/PP-100AP
Stacker 4 is open.
Close Stacker 4.
Lights
Conditions/Remedies
Power BUSY ERROR INK
STACKER
1 2 3 4
Ink low
Prepare a new ink cartridge. Use of Epson brand
ink cartridges is recommended.
The ink has reached its replacement time or it is
not installed correctly.
Replace the ink cartridge or reinstall it. (See
“How to Replace the Ink Cartridges” on page
81.)
If the ink cartridge is not recognized even if it is
installed correctly, there may be dirt on the
green circuit board. Wipe it with soft cloth and
install it again.
The product will stop operation before ink is
completely empty in order to maintain print
head quality. Therefore, some ink will be left in
the ink cartridge. Use of Epson brand ink
cartridges is recommended.
Lights
Conditions/Remedies
Power BUSY ERROR INK
STACKER
1 2 3 4

Epson Disc Producer PP-100 Specifications

General

Printing Technology	Inkjet
Disc Capacity	100 discs
Print Resolution	1440 x 1440 dpi
Interface	USB 2.0
Dimensions	377 x 493 x 348 mm
Number of Drives	1
Supported Disc Formats	CD, DVD
Operating System Compatibility	Windows XP, Windows Vista, Windows 7
Print Speed	Approximately 60 discs/hour