Epson Disc Producer PP-100 User Manual

113
Troubleshooting
Error Associated with Stacker
Lights
Conditions/Remedies
Power BUSY ERROR INK
STACKER
1 2 3 4
Only for PP-100/PP-100AP
Stacker 3 is inserted for Standard mode or
External Output mode (when Stacker 4 is set as
the output stacker).
Remove Stacker 3.
Stacker 1 is not correctly inserted.
Insert Stacker 1 correctly.
Stacker 2 is not correctly inserted.
Insert Stacker 2 correctly.
Only for PP-100/PP-100AP
Stacker 3 is not correctly inserted for External
Output mode (when Stacker 3 is set as the
output stacker) or Batch mode.
Insert Stacker 3 correctly.
Stacker 1 is empty.
Load discs into Stacker 1.
Note: The Stacker 1 light flashes when it is empty;
however. the beginning of the light flashing may
not match the exact time that the stacker
becomes empty.
Stacker 2 (set as the input stacker) is empty.
Load discs into Stacker 2.
Note: The Stacker 2 light flashes when it is empty;
however. the beginning of the light flashing may
not match the exact time that the stacker
becomes empty.
Stacker 1 is overloaded.
Remove discs so that discs are below the red
line on the stacker.
Stacker 2 (set as the input stacker) is
overloaded.
Remove discs so that discs are below the red
line on the stacker.
Stacker 3 is overloaded.
Remove all the discs from Stacker 3.

Epson Disc Producer PP-100 Specifications

General

Printing Technology	Inkjet
Disc Capacity	100 discs
Print Resolution	1440 x 1440 dpi
Interface	USB 2.0
Dimensions	377 x 493 x 348 mm
Number of Drives	1
Supported Disc Formats	CD, DVD
Operating System Compatibility	Windows XP, Windows Vista, Windows 7
Print Speed	Approximately 60 discs/hour