Epson Disc Producer PP-100 User Manual

65
Publishing Discs
Publishing Discs
This section describes how to publish a job for publishing discs to the product in Publish view of EPSON Total Disc
Maker.
1
Click [Publish] in Disc view or Label view to display Publish view.
2
Configure each setting.
See EPSON Total Disc Maker Help for details.
 Depending on the discs and PC used, the writing speed may become slower than the
set speed.
 Depending on the discs used, writing may not be able to be performed properly at the
speed recommended for the disc. If this happens, write at a slower speed. In particular,
we recommend writing to DVD±R DL at a slow speed.
 If you print on the matte label type of EPSON specified CDs/DVDs, set Label Type to
CD/DVD Premium Label.
 If Label Type is set to EPSON Specified CD/DVD Label, Quality/Speed is set to 1.
 If Write Verification is set to Compare, you can confirm whether data was written to
discs properly.
 Clicking Color Settings... allows you to make color adjustments. (See “Adjusting Print
Colors” on page 78.)
Notes

Epson Disc Producer PP-100 Specifications

General

Printing Technology	Inkjet
Disc Capacity	100 discs
Print Resolution	1440 x 1440 dpi
Interface	USB 2.0
Dimensions	377 x 493 x 348 mm
Number of Drives	1
Supported Disc Formats	CD, DVD
Operating System Compatibility	Windows XP, Windows Vista, Windows 7
Print Speed	Approximately 60 discs/hour