99
Maintenance
Replacing the Ink Pad (Only for PP-100/PP-50)
The ink pad is a part that absorbs waste ink ejected during head cleaning or printing. When it is time to replace the
ink pad, publishing is no longer possible.
How to Check When it is Time to Replace the Ink Pad
The product notifies you when it is time to replace the ink pad in the following two ways.
When appears in the Printer status display of EPSON Total Disc Utility, it is almost time to replace the ink pad.
Clicking displays a message; “The ink pad for this device will be full very soon. The device will stop
functioning when the pad becomes full. Please consult your manual and take the recommended action
immediately.”
For EPSON Total Disc Utility, see “EPSON Total Disc Utility” on page 38 or EPSON Total Disc Utility Help.
When all the lights on the control panel turn on, it is time to replace the ink pad.
How to Replace the Ink Pad
The ink pad cannot be replaced by the customer. Please contact Customer Support.
See “Where to Get Help” on page 134.
To Next Page
Loading...
