Epson Disc Producer PP-100 User Manual

87
Maintenance
How to Clean the Print Head
There are the following two ways to run head cleaning.
 Running it using the control panel on the product
 Running it from a PC
Running it using the control panel on the product
1
Turn the product on.
2
Press the Cleaning button for 3 seconds.
The BUSY light flashes, and head cleaning starts.
When head cleaning is finished, the BUSY light goes off.
Running it from a PC
1
Display the Printer Utility screen of the EPSON Total Disc Utility.
See “Properties screen (General screen)” on page 40 for display procedure.
2
Click Head Cleaning.
 Print head cleaning consumes ink. Note that if you run head cleaning more than
necessary, the lifetime of the ink cartridges is reduced.
 Do not open the ink cartridge cover while cleaning the print head. Print head cleaning
stops if the cover is opened.
 If there is a job being published, head cleaning starts after processing of the job is
finished.

Epson Disc Producer PP-100 Specifications

General

Printing Technology	Inkjet
Disc Capacity	100 discs
Print Resolution	1440 x 1440 dpi
Interface	USB 2.0
Dimensions	377 x 493 x 348 mm
Number of Drives	1
Supported Disc Formats	CD, DVD
Operating System Compatibility	Windows XP, Windows Vista, Windows 7
Print Speed	Approximately 60 discs/hour