EasyManuals Logo

Epson EB-485W User Manual

Epson EB-485W
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
Sub-menu Function
Net. Info. - Wire‐
less LAN
Displays the following network setting status information.
Connection Mode
Antenna Level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
*
Net. Info. -
Wired LAN
Displays the following network setting status information.
Projector Name
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Network Config‐
uration
The following menus are available for setting network items.
Basic, Wireless LAN, Security, Wired LAN, Mail, Others,
Reset, and Setup complete
*
Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
s Epson Projector Contact List
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s "Changing Settings Using a Web Browser (Web Control)" p.84
Notes on operating the Network menu
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Setup complete menu, and select one
of Yes, No, or Cancel. When you select Yes or No, you return to the
Configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [
], [ ], [ ], and[ ] buttons on the remote control or
the [
w], [v], [Wide], and [Tele] buttons on the control panel to move the
cursor to the key you want, and then press the [
] button to enter the
alphanumerical character. Enter figures by holding down the [Num] button
on the remote control, and pressing the numeric buttons. After inputting,
press Finish on the keyboard to confirm your input. Press Cancel on the
keyboard to cancel your input.
List of Functions
106
http://www.pureglare.com.au

Table of Contents

Other manuals for Epson EB-485W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-485W and is the answer not in the manual?

Epson EB-485W Specifications

General IconGeneral
FocusManual
Offset5.8 %
Focal length range0 - 3.71 mm
Matrix size0.59 \
White light output3100 ANSI lumens
Native aspect ratio16:10
Projection distance0 - 0.43 m
Projection technology3LCD
Contrast ratio (typical)3000:1
Screen size compatibility60 - 100 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-5 - 5 °
Projector brightness (economic mode)1800 ANSI lumens
Lamp typeUHE
Lamp power215 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
Full HDNo
Analog signal format system-
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantity2
VGA (D-Sub) ports quantity3
Ethernet LANYes
Ethernet LAN data rates10, 100 Mbit/s
Noise level35 dB
Noise level (economic mode)28 dB
RMS rated power16 W
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
Power consumption (standby)0.27 W
Power consumption (typical)300 W
Weight and Dimensions IconWeight and Dimensions
Weight5200 g

Related product manuals