f
Select the zoom factor from the zoom setting screen.
g
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a
• When a User's Logo is saved, the previous User's Logo is
erased.
• It takes a while to save. Do not operate the projector or any
connected equipment while it is saving, otherwise
malfunctions may occur.
Saving User Pattern
There are four types of patterns registered to the projector, such as ruled
lines and grid patterns.
s Settings - Pattern - Pattern Type p.101
You can also save the image that is currently being projected as a User
Pattern.
a
When a User Pattern is saved, the previous User Pattern is erased.
a
Project the image you want to use as the User Pattern, and then
press the [Menu] button.
s "Using the Configuration Menu" p.95
Using Remote Control Using the Control Panel
b
Select Pattern from Settings.
c
Select User Pattern.
Projection Functions
73
To Next Page
Loading...
Need help?
General
Weight and Dimensions
