a
You can set Color Mode from the Configuration menu.
s Image - Color Mode p.98
Setting Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
a
Press the [Menu] button.
s "Using the Configuration Menu" p.95
Using Remote Control Using the Control Panel
b
Select Auto Iris from Image.
c
Select On.
The setting is stored for each Color Mode.
d
Press the [Menu] button to finish making settings.
a
Auto Iris can only be set when the Color Mode is set to
Dynamic or Theatre.
Changing the Aspect Ratio of the Projected Image
You can change the Aspect Ratio
g
of the projected image to suit the type,
the ratio of height and width, and the resolution of the input signals.
Available Aspect Modes vary depending on the image signal currently being
projected.
Adjusting Projected Images
52
To Next Page
Loading...
Need help?
General
Weight and Dimensions
