Epson EB-485W - Automatically Detect Input Signals and Change the Projected Image (Source Search)

Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using Remote Control Using the Control Panel
Computer1 Computer2 S-Video Video
HDMIUSBLAN USBDisplay
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Projecting images
40
http://www.pureglare.com.au