Installation Methods
The projector supports the following six different projection methods.
Install the projector according to the installation location.
Turn the projector off when you are changing the installation method. Turn
the projector back on after changing the installation method.
a
You cannot use the Easy Interactive Function while the Projection
setting is Rear/Upside Down or Rear. (EB-485Wi/EB-480i/EB-475Wi
only)
s "Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only)"
p.57
• Mount the projector on a wall
or ceiling and project images
from in front of a screen.
(Front/Upside Down projection)
• Mount the projector on a wall
or ceiling and project images
from behind a translucent
screen. (Rear/Upside Down pro‐
jection)
• Project images from in front of
the screen. (Front projection)
• Project images from behind a
translucent screen. (Rear projec‐
tion)
a
Attach the feet when using the projector on a surface such as a desk.
s "Attaching the feet (Only models with feet supplied)" p.14
• Place the projector vertically and
project images from in front of
the screen. (Front/Upside Down
projection)
• Place the projector vertically and
project images from behind the
screen (Rear/Upside Down pro‐
jection)
Installing the Projector
24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
