EasyManuals Logo

Epson EB-485W User Manual

Epson EB-485W
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Sub-menu Function
Abs. Color Temp.
(This item cannot be selected if Color Mode is set to
sRGB
g
.)
You can adjust the overall tint of the image. You can adjust tints
in 10 stages from 5000 K to 10000 K. The image is tinted blue
when a high value is selected and tinted red when a low value is
selected.
Color Adjust‐
ment
(This item cannot be selected if Color Mode is set to
sRGB
g
.)
You can adjust the color strength for Red, Green, and Blue
individually.
Auto Iris
(This item can be set only if Color Mode is set to Dynamic or
Theatre.)
Set to On to adjust the iris to obtain the optimum light for images
being projected.
The setting is stored for each Color Mode.
s "Setting Auto Iris" p.52
Reset
You can reset all adjustment values for the Image menu to their
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu" p.115
Signal Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display, USB, or LAN.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.40
Sub-menu Function
Auto Setup
(Only available when analog RGB computer signals are being
input.)
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
List of Functions
99
http://www.pureglare.com.au

Table of Contents

Other manuals for Epson EB-485W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-485W and is the answer not in the manual?

Epson EB-485W Specifications

General IconGeneral
FocusManual
Offset5.8 %
Focal length range0 - 3.71 mm
Matrix size0.59 \
White light output3100 ANSI lumens
Native aspect ratio16:10
Projection distance0 - 0.43 m
Projection technology3LCD
Contrast ratio (typical)3000:1
Screen size compatibility60 - 100 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-5 - 5 °
Projector brightness (economic mode)1800 ANSI lumens
Lamp typeUHE
Lamp power215 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
Full HDNo
Analog signal format system-
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantity2
VGA (D-Sub) ports quantity3
Ethernet LANYes
Ethernet LAN data rates10, 100 Mbit/s
Noise level35 dB
Noise level (economic mode)28 dB
RMS rated power16 W
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
Power consumption (standby)0.27 W
Power consumption (typical)300 W
Weight and Dimensions IconWeight and Dimensions
Weight5200 g

Related product manuals