Projector Feature Settings - Operation Menu
225
Setting Options Description
Standby Mode Communication
On
Communication
Off
Set to Communication On to allow
monitoring and controlling the projector
over a network when the projector is in
standby mode.
Setting is only displayed when A/V
Output is set to While Projecting.
Port Wired LAN
Wireless LAN
Sets the port to use while the Standby
Mode setting is set to Communication
On.
Startup Source
(EB‑755F/EB‑750F)
Various input
sources available
Select the image source you want to
project when the projector is turned on
in Content Playback mode.
Quick Startup 20min.
60min.
90min.
Off
Sets the time period for Quick Startup
mode. The projector enters this mode
when you turn it off. You can start
projecting in approximately 5 seconds by
pressing the power button.
(Set A/V Output to While Projecting
first.)
However, it may take longer to become
ready for use in the following situations:
• When projecting from the projector's
USB port
• When projecting using the Screen
Mirroring features
• If whiteboard sharing was terminated
in the previous session
(EB‑735Fi/EB‑725Wi)
• If you want to restore the whiteboard
contents from the previous session
(EB‑735Fi/EB‑725Wi)
Indicators On
Off
Set to Off to turn off the indicator lights
on the projector.
Inv Direction
Button
On
Off
Set to On to invert the control panel
arrow button direction to match the
projector installation position.
Setting Options Description
Content Playback
(EB‑755F/EB‑750F)
On
Off
Set to On to play back a playlist.
Overlay Effect
(EB‑755F/EB‑750F)
Overlay Effect
Shape Filter
Color Filter
Lightness
Adds color and shape effects to the
projected image.
Setting is not displayed when using the
Edge Blending feature.
USB Viewer
(EB‑755F/EB‑750F)
— Selects and plays back a playlist saved on
the USB flash drive.
Reset Operation
Settings
— Resets all adjustment values on the
Operation menu to their default settings.
gg Related Links
• "Projecting in Content Playback Mode" p.135
• "Adjusting the Brightness" p.89