EasyManuals Logo

Epson EB-735F User Manual

Epson EB-735F
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Adjusting the Image Position
74
You can use the Image Shift feature to adjust the image position without
moving the projector.
a
This feature is not available if the Zoom option is set to the widest
setting.
We recommend adjusting the image position at least 30 minutes after
you start projecting, because images are not stable right after turning
on the projector.
a
Turn on the projector and display an image.
b
Adjust the image size using the Wide and Tele buttons.
After you adjust the image size, the Image Shift screen is displayed
automatically.
c
Use the arrow buttons to adjust the image position.
d
Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after
approximately 10 seconds.
a
The Image Shift setting is retained even if the projector is turned off.
You need to re-adjust the position if you change the installation
location or angle of the projector.
You can also adjust the Image Shift setting in the projector's
Installation menu.

Table of Contents

Other manuals for Epson EB-735F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-735F and is the answer not in the manual?

Epson EB-735F Specifications

General IconGeneral
Matrix size0.61 \
Number of colors1.07 billion colors
Native aspect ratio16:9
Projection distance- m
Vertical scan range192 - 240 Hz
Projection technology3LCD
Contrast ratio (typical)2500000:1
Screen size compatibility65 - 120 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-3 - 3 °
Projector brightness (economic mode)2500 ANSI lumens
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
FocusManual
Throw ratio0.26 - 0.36:1
Zoom capabilityYes
Fixed focal length3.7 mm
3DNo
Video processing10 bit
Video color modesBlackboard, Cinema, Dynamic, Presentation, sRGB
Analog signal format system-
HDMI connector typeFull-size
HDMI ports quantity3
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 2.0 Type-B ports quantity1
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Noise level36 dB
Country of originChina
Noise level (economic mode)26 dB
Cables includedAC
Bundled softwareEasyMP Multi PC Projection, Epson Projektor Management
Storage temperature (T-T)-10 - 60 °C
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)255 W
Power consumption (economy mode)197 W
PlacementCeiling, Wall
Product typeUltra short throw projector
Product colorWhite
Cable lock slot typeKensington
RMS rated power16 W
Supported network protocolsHTTPS, IPv4, IPv6, SNMP, ESC/VP.net, PJLink
Sustainability certificatesTCO
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet (UK)24 pc(s)
Harmonized System (HS) code85286200
Software supportvia: AMX, Crestron (Network), Extron, Crestron (RS-232C only), Crestron Integrated Partner, Crestron RoomView, Extron IP Link, Extron XTP, AMX Device Discovery, Control4 Simple Device Discovery Protocol
Weight and Dimensions IconWeight and Dimensions
Depth395 mm
Width356 mm
Height133 mm
Weight5700 g
Package depth475 mm
Package width442 mm
Package height315 mm
Package weight8209 g

Related product manuals