Projector Network Settings - Network Menu
235
Setting Options Description
Trap IP Address 1
Trap IP Address 2
Various IP
addresses
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
Enter the SNMP community name.
AMX Device
Discovery
On
Off
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Crestron
Connected
On
Off
Set to On only when monitoring or
controlling the projector over the
network using Crestron Connected.
Enabling Crestron Connected disables
the Epson Message Broadcasting feature
in the Epson Projector Management
software.
Control4 SDDP On
Off
Set to On to allow device information to
be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
Setting Options Description
Art-Net
(EB‑755F/EB‑750F)
On
Off
Set to On when you want to control the
projector using Art-Net.
• Net: enter a number for the projector's
Net using 0 to 127 (default is 0).
• Sub-Net: enter a number for the
projector's Sub-Net using 0 to 15
(default is 0).
• Universe: enter a number for the
projector's Universe using 0 to 15
(default is 0).
• Start Channel: enter the start channel
that handles Art-Net using 1 to 500
(default is 1).
Secure HTTP On
Off
To strengthen security, communication
between the projector and computer in
Web control is encrypted. When setting
security with Web control, it is
recommended to set this to On.
Web Server
Certificate
— Imports the Web server certificate for
secure HTTP.
Network Menu - Network Projection Settings
Settings on the Network Projection menu let you select the settings relates to
network projection.
Setting Options Description
Projector Keyword On
Off
Set to On to enable a security password
to prevent access to the projector by
anyone not in the same room as the
projector. You must enter a displayed,
randomized keyword from a computer
using Epson iProjection to access the
projector and share the current screen.
Epson iProjection On
Off
Set to On to use Epson iProjection.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
