Projector Interactive Settings - Interactive Menu
241
Setting Options Description
Authentication Anonymous
Simple
Digest-MD5
Sets the type of authentication expected
by the LDAP server. If you want to select
Digest-MD5 or Simple as an
authentication method when an IP
address is set for LDAP Server, you must
configure the DNS server to enable
reverse DNS lookup.
User Name Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter a user name for the LDAP server.
Use one of the following methods when
entering the user name with the domain
name:
• "domain name\user name"
• "user name@domain name"
Password Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter a password for the LDAP server.
Check Connection — Tests the network connection.
Search Base DN Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter the DN (Distinguished Name)
where the search for user names and
email addresses should start. Make sure
you specify all OU (Organizational Unit)
and DC (Domain Component) as
necessary in the order of OU then DC;
for example,
"OU=accounts,DC=example,DC=com".
The DN must be at or below the DC level
in the database structure.
User Attributes Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter the attribute for user name; for
example, "cn".
Setting Options Description
Mail Attributes Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter the attribute for mail address; for
example, "mail".
Group Attributes Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter the attribute for a user group
name.
Search target
attributes
Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter the search key for user name, email
address, and user group name. The
default value is "cn". You can specify up
to three keys separated by comma(s). Do
not use three or more commas, commas
right at the start or the end, and
continuous commas. The search is
performed using forward matching.
Additional filter Up to 64
alphanumeric
characters
(do not use : and
spaces)
Enter an additional search filter to
Search target attributes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
