Image Shape
72
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Auto Screen Adjustment and press [Enter].
You see a guide screen.
e
Follow the on-screen instructions to adjust the position of the projected
image so that the corner markers appear just inside the yellow area.
f
Press [Enter].
The guide pattern appears and the projector starts adjusting the image
shape.
If there are any distortions in the shape of the projected images as a result of
the adjustments, correct the image shape using the Quick Corner correction.
To Next Page
Loading...
