100 Fine-Tuning the Projector
■ Video Signal
Select the setting for the type of equipment you’ve connected
to the
Video1 or Video2 ports. Leave this setting at Auto
unless you are using a 60-Hz PAL system (then select
PAL60).
■ Aspect
Sets the image’s aspect ratio (ratio of width to height).
Depending on your projector model and input source, you
can select
Auto, Normal, 4:3, 16:9, Full, Zoom, or
Through; see page 50 for more information.
Customizing Projector Features
You can use the Settings menu to lock the buttons on the projector,
adjust audio volume, and customize several other features.
■ Keystone
Adjusts the shape of the image if the projector has been tilted
upward or placed at an angle to the screen.
Select
H/V-Keystone to correct horizontal and vertical keystone
distortion.
Select
Quick Corner to adjust the shape and position of the
projected image.
To Next Page
Loading...
Need help?
General
