Fine-Tuning the Projector 107
Customizing Power and Operation
You can use the Extended menu to customize the way the projector
displays images, enable quick startup, turn sleep mode on or off, and
customize other projector operations.
■ Display
Use this setting to turn off the display of messages, change the
background color, enable logo display, or turn off the startup
screen display.
■ Closed Caption
Enables or disables closed captions. Select CC1, CC2, or OFF. The
captions are not visible when the menu is displayed or when you
use EMP Monitor to access the projector through your network.
■ User’s Logo
Create a custom startup screen, as described on page 104.
■ Projection
Select Front (to project from the front of a screen and right side
up),
Front/Ceiling (when the projector is mounted upside-down
from the ceiling),
Rear (to project from behind onto a
transparent screen), or
Rear/Ceiling (to project from behind onto
a transparent screen when the projector is mounted upside-down
from the ceiling).
■ Operation
Enable Direct Power On if you want to be able to start the
projector when you connect the power cord (without pressing the
note
If you hold down the A/V
Mute
button on the remote
control for about five
seconds, you switch between
Front and Front/Ceiling
or Rear and Rear/Ceiling.
To Next Page
Loading...
Need help?
General
