Maintaining the Projector 131
3. Install two AA alkaline batteries,
inserting the
+ and – ends as
shown.
4. Position the cover as shown, then
press down until it snaps into
place.
Transporting the Projector
The projector contains many glass and precision parts. Follow these
guidelines to prevent damage:
■ When shipping the projector for repairs, use the original
packaging material if possible, including the protective lens pads.
If you do not have the original packaging, use equivalent
materials, placing plenty of cushioning around the projector.
■ When transporting the projector a long distance, first place it in a
hard-shell shipping case, then pack it in a firm box with
cushioning around the case.
■ Attach the lens cover to the lens.
■ If an SD card is installed, remove it from the projector.
■ Return the projector feet to their stored (highest) positions.
■ Turn the vertical lens shift dial so that the lens is in its lowest
position.
note
Epson shall not be liable for
any damages incurred
during transportation.
To Next Page
Loading...
Need help?
General
