Setting Up the Projector 19
Ideally, you should place the projector directly in front of the center of
the screen, facing it toward the screen squarely. The base of the lens
should be about level with the bottom of the screen.
If you place the projector below screen level, you can use the vertical
lens shift dial to raise the lens (see page 46). You can also tilt the
projector up by extending the front adjustable foot. Tilting the
projector causes the image to become “keystone” shaped, but you can
correct the distortion (see page 47).
For instructions on installing the projector in a permanent location,
such as a theater or conference room, see page 149.
Connecting to a Computer
You can connect the projector to any computer that has a standard
video output (monitor) port, including desktop models, PC notebook
computers, MacBook, PowerBook, and iBook computers, and
hand-held devices.
You can also connect a Windows
®
computer to the Type B USB port
on the projector (see page 21). This allows you to connect an
additional computer to the projector.
If you have the optional wireless mouse receiver, you can use your
remote control as a wireless mouse when projecting from a computer
(page 56).
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
®
anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
page 12.
Screen
Projector
To Next Page
Loading...
Need help?
General
