Displaying and Adjusting the Image 45
Adjusting the Position of the Image
If the image is too low on the screen, you can use the front adjustable
foot to raise it.
1. Stand behind the projector. Press the foot release lever up and lift
the front of the projector.
2. Once the image is positioned where you want it, release the lever
to lock the foot in position.
3. If necessary, you can fine-tune the height or level the image by
turning any of the projector’s adjustable feet.
Raising the projector causes the image shape to distort or “keystone,”
but you can correct the shape as described on page 47.
To Next Page
Loading...
Need help?
General
