90 Preparing the Projector to Present Through a Network
Projecting Over a Network
Once you’ve set up your projector and computer in either Ad Hoc
(Quick) mode or Access Point (Advanced) mode (or in the optional
wired LAN mode, as described on page 114), see the EasyMP
Operation Guide for instructions on the following EasyMP features
(G5150NL and G5350NL only):
■ Starting NS Connection
■ Projecting over the network
■ Multi-screen projection
■ Projecting video clips (Movie Sending Mode)
■ Using Presentation Mode
■ Using Virtual Displays
Connecting With Windows Vista
If you have Windows Vista, you can use the Network Projector
function to connect to the projector without installing the EasyMP
software. This provides a quick, easy way to connect wirelessly,
though with limited capabilities. Not all the features available with
EMP NS Connection are possible when connecting using the Vista
network projector function. All performances are enhanced when you
use EMP NS Connection.
Follow these steps:
1. Turn on the projector.
2. Press the
EasyMP button on the remote control. The standby
screen appears.
To Next Page
Loading...
Need help?
General
