64 Preparing the Projector to Present Through a Network
Note that the SSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
7. If you want to prevent the SSID from being displayed on the
standby screen, set the
SSID Display option to Off.
8. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display setting to Off.
9. When you’re done making these settings, select
Return, Setup
complete
, and then Yes to confirm that you want to save the
changes.
10. Press
Menu to exit.
Now you’re ready to set up your computer to project wirelessly. Go to
“Configuring the Network Settings for Windows” on page 65, or
“Setting Up Your Mac for Ad Hoc Mode” on page 67.
To Next Page
Loading...
Need help?
General
