Submenu Function
Multi-Projection
Make settings when projecting from multiple projectors.
s "Multi-Projection Function" p.65
Brightness Level (not available for EB-G6470WU): When
the brightness of each lamp differs, set the lamp brightness
level between 1 and 5. This item can be adjusted only when
Power Consumption is set to Normal from the Settings
menu.
Edge Blending: Corrects a border between multiple images
to create a seamless screen.
s "Adjust the Edges of the Images (Edge Blending)"
p.66
Multi-screen: You can adjust the tint and brightness of each
projected image.
s
"Adjusting to Match Colors" p.68
Projector ID: Set the ID from 1 to 9. Off indicates that no
ID is set.
s "ID Settings" p.34
Schedule Set-
tings
You can set the projector's schedule so that it performs a
specific operation at a pre-scheduled time.
s "Scheduling Function" p.80
Language
You can set the language for messages and menus.
Submenu Function
Reset
You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen Type, Screen Position, Projection, Direction, High
Altitude Mode, Remote Control Type, Inv Direction
Button , Startup Source Search, A/V Mute Release, Lens
Type, A/V Output, Monitor Out, Standby Mode, Control
Communications, Extron XTP, Multi-screen, Projector ID,
and Language
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.114
* When User's Logo Protection is set to On in Password Protection, you
cannot change settings related to user's logo. You can make changes after
setting User's Logo Protection to Off.
s "Managing Users (Password Protection)" p.83
Network Menu
When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
List of Functions
100
To Next Page
Loading...
Need help?
General
