The settings for the image currently displayed are saved as a memory,
allowing you to load them when necessary. Settings for the following menu
items are saved in the memory.
Top Menu Submenu
Image
All setting items
Signal
3D Setup
Progressive
Frame Interpolation
Noise Reduction
Mosquito NR
Video Range
Scale
Overscan
Image Processing
Settings
Power Consumption
Extended
Brightness Level
Edge Blending
Multi-screen
Saving/Loading/Erasing the Memory
a
Press the [Menu] button while an image is being displayed.
s
"Using the Configuration Menu" p.89
b
Select Memory from Settings.
c
Select the function you want to perform, then press the [ ]
button.
You can only perform Load Memory and Save Memory when an
image is displayed.
Memory Function
78
To Next Page
Loading...
Need help?
General
