c
Correct screen distortion using the distortion ring.
When correcting distortion, the area around the edges of the image
is also focused.
d
Turn the focus ring to focus the entire screen.
If the area around the lens axis is out of focus, fine-tune by turning
the distortion ring.
Adjusting the Height of the Projected Image (for
Normal Installment)
Extend or retract the front foot to make adjustments. You can adjust the
position of the image by tilting the projector up to 10 degrees.
A
Extend the front foot.
B
Retract the front foot.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
Adjusting the Horizontal Tilt (for Normal
Installment)
Extend and retract the rear feet to adjust the projector's horizontal tilt.
Installing the Projector
33
To Next Page
Loading...
Need help?
General
