Submenu Function
Sync Info
You can display the image signal
information.
This information may be needed if service
is required.
Status
This is information about errors that have
occurred on the projector.
This information may be needed if service
is required.
Serial Number
Displays the projector's serial number.
Event ID
When problems occur when the projector
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s "About Event ID" p.138
HDBaseT Sig-
nal Quality
You can display the image signal
information from the HDBaseT port.
Version Main
Main2
Video
Displays the projector's firmware version
information.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, all items for Network menus, Lamp Hours,
Language, Password, Multi-screen, Date & Time, Panel
Alignment, and Color Uniformity.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
Reset Memory
The name and settings saved in Save Memory are reset.
s "Memory Function" p.78
List of Functions
114
To Next Page
Loading...
Need help?
General
