Reset Menu
114
NFC Settings
s Reset > NFC Settings
You can prevent scanning to the projector's settings.
NFC Write Protection
Prevents anyone from scanning the projector's settings.
NFC Write Password
Set a password for scanning the projector's settings up to 32 alphanumeric
characters long.
a
If you do not set an NFC Write Password, NFC Write Protection is
enabled automatically when you turn on the projector. If you want to
scan the projector's information using the NFC tag on the projector, set
the NFC Write Password setting to Off.
Reset All Config
s Reset > Reset All Config
You can reset most of the projector settings to their default values.
You cannot reset the following settings:
• Memory
• Startup Screen *
• Panel Alignment
• Color Uniformity
• User's Logo *
• Date & Time
• Color Matching
• Language
• Network menu items
• NFC Settings
* Only when you set the User's Logo Protection setting to On in the
Password Protection setting menu.
Reset All (Factory Default)
s Reset > Reset All (Factory Default)
You can reset the setting values to the values you set or to their factory default
values.
Reset All (User Default)
You can apply the values you set in the User Default Setting menu.
Reset All (Factory Default)
You can reset all of the projector settings to their default factory values.
You cannot reset the following settings:
• Light Source Info
• Operation Hours
• Password Protection
• Password
• Schedule Settings *
* Only when you set Schedule Protection to On from the Password
Protection screen.
User Default Setting
You can define the default value used when performing the Reset All
(User Default) functions.
You can set the values for the following settings:
• Color Mode
• Light Source Mode
• Brightness Level
• Constant Brightness
• Messages
• Standby Confirmation
• A/V Mute Timer
To Next Page
Loading...
Need help?
General