Extended Menu
93
USB Power
s Extended > Operation > USB Power
Set to Always On to continue supplying power to the streaming media player
when the projector is not projecting images. This lets the streaming media
player start earlier, or perform its firmware updates automatically over a
network if necessary.
a
Set A/V Output to While Projecting first.
A/V Mute Settings
s Extended > Operation > A/V Mute Settings
You can adjust the A/V Mute settings.
Fade-in
Set the number of seconds for a fade-in transition effect when displaying
an image.
Fade-out
Set the number of seconds for a fade-out transition effect when hiding an
image.
A/V Mute Timer
Turns off the projector automatically if A/V Mute is enabled and 2 hours
of inactivity has passed.
Release A/V Mute
Select A/V Mute if you want to use only the [A/V Mute] button to turn off
A/V mute or if you want to send a command to turn off A/V Mute, or
select Any Button to use any button to turn it off.
Beep
s Extended > Operation > Advanced > Beep
You can control the beep that sounds when you turn the projector on or off.
Indicators
s Extended > Operation > Advanced > Indicators
Set to Off to turn off the indicator lights on the projector except when an
error or warning occurs.
Log Save Destination
s Extended > Operation > Advanced > Log Save Destination
You can set where you want to save the operation logs for the projector.
Select USB and Internal Memory to save logs as text files (.log) to a USB
flash drive inserted into the projector's USB-A port.
a
Setting is only displayed when Content Playback is set to Off.
Batch Setup Range
s Extended > Operation > Advanced > Batch Setup Range
You can select which menu settings you want copied.
All
Select this to copy all of the projector menu settings using the batch setup
feature.
Limited
Select this if you do not want to copy the EDID and Network menu
settings.
To Next Page
Loading...
Need help?
General